See the Owner's Manual for more information. 4WD 1980-1991 With manual locking hubs: Tighten adjusting nut to 50 ft-lbs/68 Nm while turning hub. Impala Limited 2014-2016 155/210-ft/lbs/Nm. Specs datasheet with technical data and performance data plus an analysis of the direct market competition of Chevrolet Sonic LT Hatchback 1.4L Turbo (man. ), Seat belts, 3-point, driver and front passenger, height-adjustable includes pretensioners and load limiters, Seat belts, 3-point, rear, all seating positions, rear, LATCH system (Lower Anchors and Tethers for CHildren), for child restraint seats, <<< Preliminary 2020 Warranty Note >>> Warranty Note / 3 Basic Years, 36,000 Basic Miles/km / 5 Drivetrain Years, 60,000 Drivetrain Miles/km / Qualified Fleet Purchases: 5 Years/100,000 Miles Drivetrain Note, 5 Roadside Assistance Years / 6 Corrosion Years, 3 Corrosion Years / 100,000 Corrosion Miles, 36,000 Corrosion Miles/km / 60,000 Roadside Assistance Miles, Qualified Fleet Purchases: 5 Years/100,000 Miles Roadside Assistance Note / 1 Year/1 Visit Maintenance Note. Install ring and tighten locknut to 160 ft-lbs/217 Nm minimum. Just tighten them until snug with a short 3/8" drive ratchet and a socket or a short box end wrench. 95 is what I … The caliper brackets have a torque specification of 74 ft.-lbs; the caliper guide pin bolts have a torque spec of 21 ft.-lbs. ), Airbags, 10 total (Always use seat belts and child restraints. Detailed car specs: 2012 Chevrolet Sonic. That saves a lot of time because you don’t have to refer back to the component locator or circuit locations. Turn adjusting nut to align. loss of control and a crash. Loosen 45° then retighten to 199 ft-lbs/270 Nm. Stake new nut. Torque: 148 lb-ft @ 1850 rpm: Base engine size: 1.4 l: Horsepower: 138 hp @ 4900 rpm: Turning circle: 34.5 ft. Each side of the stake should be in contact approximately 45° to each side of the slot. Style 2 nut has the thick collar (2.7 mm) thickness. Use new original equipment nut.] The front brakes on the Sonic use single piston calipers. 1997-2003 First design nut (Pac-style nut painted black), 284 ft-lbs/385 Nm; second design nut (solid gray nut), 173 ft-lbs/235 Nm. ), Airbags, thorax side-impact seat-mounted, side-front and rear outboard seating positions (Always use seat belts and child restraints. I went with 100 since it was stock spec. Research, compare and save listings, or contact sellers directly from 196 Cruze models in Maywood. Caprice. Hole in pin must align with locknut. Always use a new nut. Detailed specs and features for the Used 2015 Chevrolet Sonic including dimensions, horsepower, engine, capacity, fuel economy, transmission, engine type, cylinders, drivetrain and more. RWD 2015-2017 37/50-ft/lbs/Nm After tightening to specification, turn an additional 60°. Detailed features and specs for the Used 2017 Chevrolet Sonic including fuel economy, transmission, warranty, engine type, cylinders, drivetrain and more. 2012 Chevrolet Sonic hatchback Mechanical Engine, ECOTEC Turbo 1.4L Variable Valve Timing DOHC 4-cylinder sequential MFI (138 hp [103 kW] @ 4900 rpm, 148 lb-ft of torque [199.8 N-m] @ 1850 rpm) The typical transmission is a 6-speed manual, but all trims may be matched up with a 6-speed automatic. The torque specification fo the threads we use is minimum 70ft-lbs with maximum being stock recommended. Engine, ECOTEC 1.8L Variable Valve Timing DOHC 4-cylinder sequential MFI (138 hp [103 kW] @ 6300 rpm, 125 lb-ft of torque [168.8 N-m] @ 3800 rpm) (Available with (YF5) California state emissions requirements or (NE1) Connecticut, Delaware, Maine, Maryland, Massachusetts, New Jersey, New York, Oregon, Pennsylvania, Rhode Island, Vermont or Washington state emissions requirements when … ), OnStar and Chevrolet connected services capable (Terms and limitations apply. The Chevrolet Sonic has been on ... All Sonics come with a 1.4-liter turbocharged four-cylinder engine producing 138 horsepower and 148 pound-feet of torque, ... the top-spec … Loosen 180°, then tighten to 273 ft-lbs/ 370 Nm. Chevrolet Sonic Axle Nut Torque. 1989-1991 125/179-ft/lbs/Nm. Use the Champion torque recommendation below as a guide for tightening all spark plugs. After installation, stake nut. 2014-2017 Tighten to 258 ft-lbs/350 Nm. Back off 3/ 8 turn. See the Owner's Manual for more information. Alldatadiy.com, on the other hand, uses the factory diagrams. ), Airbags, dual-stage, frontal, driver and right-front passenger includes Passenger Sensing System (Always use seat belts and child restraints. Tighten to 111 ft-lbs/150 Nm. REAR 37/50-ft/lbs/Nm After tightening to specification, turn an additional 60°. Spend a little bit more, however, and this subcompact becomes an affordable daily driver that's quiet and well equipped. Removal Procedure . ), Seats, front bucket with recline and height-adjustable headrests, Seat adjuster, driver 4-way manual, fore/aft, up/down, Seat adjuster, front passenger 2-way manual, fore/aft, Seat, rear bench 60/40 split-folding with outboard height-adjustable headrests, Steering wheel controls, mounted audio and phone interface controls, Driver Information Center with trip odometer, fuel range, average fuel economy and average vehicle speed, Engine immobilizer, theft-deterrent system, Theft-deterrent system, content theft alarm, Audio system feature, USB ports, 2 and auxiliary input jack, Audio system feature, auxiliary input jack, Power outlet, auxiliary, front center console, Air filtration system, pollutant and odor, Bottle holders, 2, on driver and front passenger doors with storage pockets, Visors, driver and front passenger vanity mirrors, covered, Assist handles, driver, front passenger and rear outboard, Lighting, interior overhead courtesy, rear and dual front reading lamps, Chevrolet Connected Access capable (Subject to terms. Special Tools. Welcome to 2CarPros. 2016-2017 37/50-ft/lbs/Nm After tightening to specification, turn an additional 60°. Loosen 180°, then tighten to 313 ft-lbs/425 Nm. After installation, stake nut. See onstar.com or dealer for details. Cool Automotive Products and Tool Recommendations, Read AUTO REPAIR ARTICLES sorted by topic, Custom Wordpress Website created by Wizzy Wig Web Design, Minneapolis MN. Hole in pin must align with locknut. News ... Torque. Chevrolet Sonic 2017 - Find out the correct alloy wheel fitment, PCD, offset and such specs as bolt pattern, thread size(THD), center bore(CB) for Chevrolet Sonic 2017 The Chevrolet Sonic B-Spec race car has been designed to conform to the series rules for the B-Spec “stock” classes for the Sports Car Club of America (SCCA) and the Grand Am Series. 2017 Use new nut. The entry-level 2020 Chevrolet Sonic puts the emphasis on basic when it comes to basic transportation. I need to know the torque specs for a 1.4 L cruze head bolts. All are torqued to 71 inch pounds. Always replace nut after removal. Additional features for compatible phones include: Bluetooth audio streaming for 2 active devices, voice command pass-through to phone, Apple CarPlay and Android Auto capable. While the turbocha… 2012-2013 Tighten to 111 ft-lbs/150 Nm. Do you. Step One. Loosen 45° then retighten to 199 ft-lbs/270 Nm. We love this engine for the healthful torque and great gasoline economy. Install ring and tighten locknut to 160 ft-lbs/217 Nm minimum. Audio system feature, 4-speaker system includes 2 tweeters and 2 front speakers located in front doors, Bluetooth for phone, personal cell phone connectivity to vehicle audio system, 4G LTE Wi-Fi Hotspot capable (Terms and limitations apply. Tang on ring must press through slot on spindle. Specs datasheet with technical data and performance data plus an analysis of the direct market competition of Chevrolet Sonic LTZ Sedan 1.4L Turbo in 2015, the model with 4-door sedan body and Line-4 1364 cm3 / 83.2 cui engine size, 103 kW / 140 PS / 138 hp (SAE cert) of power, 200 Nm / 147 lb-ft of torque, 6-speed manual powertrain for North America . See the Owner's Manual for more information. Find specifications for every 2013 Chevrolet Sonic: gas mileage, engine, performance, warranty, equipment and more. 2015-2017 192/260-ft/lbs/Nm Use new original equipment nut. No. I - Answered by a verified Chevy Mechanic AWD 2007-2016 FRONT 173/235-ft/lbs/Nm REAR 151/205-ft/lbs/Nm. 2016-2017 185/250-ft/lbs/Nm se new nut. Yes. Endplay should be .001- .010″. AWD 2010-2017 FRONT 151/205-ft/lbs/Nm REAR 151/205-ft/lbs/Nm, AWD .2009-2017 FRONT 173/235-ft/lbs/Nm REAR 151/205-ft/lbs/Nm. Endplay should be .001- .010″. Back off and retighten to 35 ft-lbs/47 Nm. Stake new nut. Style 1 nut has the thin collar (1.5 mm) thickness. 2012 Chevrolet Sonic 1.4 L Turbo. 2011-2017Tighten in three steps: First, 111 ft-lbs/150 Nm; second, loosen 45 degrees; last, tighten 185 ft-lbs/250 Nm. Install the new plug finger tight, and complete the installation with a torque wrench. If you’re tracking down a wiring issue, Eautorepair.net is the better choice. AWD 2015-2017 FRONT 37/50-ft/lbs/Nm [After tightening to specification, turn an additional 60°. Children are safer when properly secured in a rear seat in the appropriate child restraint. Back off 45 degrees and retighten to 184 ft-lbs/250 Nm. 2014-2017 Tighten to 111 ft-lbs/150 Nm. Children are safer when properly secured in a rear seat in the appropriate child restraint. With automatic locking hubs tighten adjusting nut to 50 ft-lbs/68 Nm while turning hub. Note: If using a torque wrench vs. plug wrench, please refer to the Torque Recommendations chart below. 6) in 2017 the model with 5-door hatchback body and Line-4 1364 cm3 / 83.2 cui engine size, 103 kW / 140 PS / 138 hp (SAE cert) of power, 200 Nm / 147 lb-ft of torque, 6-speed manual powertrain offered since Autumn 2016 for North … 2015-2017 188/255-ft/lbs/Nm Use new original equipment nut. Check out the full specs of the 2017 Chevrolet Sonic LT Hatchback, from performance and fuel economy to colors and materials. Eautorepair.net redraws factory wiring diagrams in color and includes the component, splice and ground locations right in their diagrams. 2014-2017 184/250-ft/lbs/Nm Use new original equipment nut. REAR 151/205-ft/lbs/Nm Use new original equipment nut. 2011 Chevrolet Sonic Sedan 1.8: This automobile has a 4 door saloon (sedan) body style with a front located engine supplying power to the front wheels. Back off and retighten to 50 ft-lbs/68 Nm. The front guide pins have been an issue. oʊ / ə-VAY-oh) (sold as Chevrolet Sonic in North America and parts of Asia since 2011) is a subcompact car manufactured since 2002 (by Daewoo from 2002 to 2011), marketed worldwide in 120 countries under seven brands (Chevrolet, Daewoo, Holden, Pontiac, Ravon and Suzuki). If you need to dig into your doors, dash or console, Alldatadiy.com is the better choice because Eautorepair.net doesn’t any interior or exterior trim or body part removal. 125 lb-ft @ 3800 rpm Transmission. Limited AWD 2017 FRONT 173/235-ft/lbs/Nm REAR 151/205-ft/lbs/Nm. For Style 1, 244 ft-lbs/330 Nm. Disconnect the negative battery cable. Many people damage threads in aluminum housings, especially on oil pan drain plug holes, because they stubbornly torque the bolts and sometimes to wrong torque values. AWD 2005-2008 118/160-ft/lbs/Nm 192/260-ft/lbs/Nm, AWD 2002-2005 118/160-ft/lbs/Nm 192/260-ft/lbs/Nm. 3 Replies. Find CHEVROLET Sonic reviews, used cars specs in South Africa, Find here all used CHEVROLET cars offers in South Africa Pricing: ---Eautorepair.net--- 1 month subscription $19.95 per vehicle 1-year subscription $29.95 per vehicle 4-year subscription $44.95 per vehicle ---Alldatadiy.com--- 1-year $29.95 subscription: additional vehicles $19/95 each 5-year $49.95 subscription: additional vehicles $34.95 each Which one should YOU choose? They include wiring diagrams and technical service bulletins. Limited 2016 Tighten in three steps: First, 111 ft-lbs/150 Nm; second, loosen 45 degrees; last, tighten 185 ft-lbs/250 Nm. In most cases, their diagrams are right from the factory manuals. Chevrolet Sprint Axle Nut Torque. Children are safer when properly secured in a rear seat in the appropriate child restraint. Use new nut. 2012-2017 There are two types of wheel drive shaft nuts, both of which have different tightening torque specifications. AWD 2012-2015 FRONT 151/205-ft/lbs/Nm Use new original equipment nut. Audio system, Chevrolet Infotainment 3 system, 7" diagonal color touchscreen, AM/FM stereo. This is what I need. 1985-1988 151/205-ft/lbs/Nm. ECOTEC TURBO 1.4L VARIABLE VALVE TIMING DOHC 4-CYLINDER SEQUENTIAL MFI Horsepower. CHANGE CAR COMPARE Values ... Torque. ft/17.1 kgm) at 3800 rpm. See onstar.com or dealer for details. Its 4 cylinder, double overhead camshaft naturally aspirated engine has 4 valves per cylinder and a capacity of 1.8 litres. Chevrolet Sonic Repair Manual / Powertrain / Engine / Engine Block / Cylinder Head / Cylinder Head Replacement. Before you install your wheels, check your vehicle’s recommended torque. Sunday, August 18th, 2019 AT 3:03 PM. 125 @ 3800 RPM Other Engine Options. 2013 Chevrolet Cruze LTZ 4dr Sdn features and specs at Car and Driver. ), Airbags, head curtain, side-front and rear outboard seating positions (Always use seat belts and child restraints. For Style 2, First Pass: 37 ft-lbs/50 Nm; Final Pass: plus 60°. 2013-2015 177/240-ft/lbs/Nm Use new original equipment nut. It offers a comfortable ride and plenty of standard features, including a 4G LTE hotspot, giving passengers the ability to surf the web far outside the reach of the Wi-Fi at Starbucks. Loosen 180°, then tighten to 273 ft-lbs/ 370 Nm. Malibu Limited 2016 Tighten to 111 ft-lbs/150 Nm. We may earn a commission for purchases made through our links. Back off 45 degrees and retighten to 184 ft-lbs/250 Nm. Forget the torque values. 2012-2015 199/270-ft/lbs/Nm Use new nut. Front Wheel Drive Shaft Replacement - Left Side Special Tools CH-313 S There is no set pattern but a simple criss cross pattern starting in … See the Owner's Manual for more information. ), Airbags, knee, driver and front passenger (Always use seat belts and child restraints. Tighten to 111 ft-lbs/150 Nm. 2017 FRONT AND REAR Use new nut. Back off to 0. 2021 Chevrolet Sonic Engine For 2021, the Sonic droplets that old 1.8-liter alternative, departing simply the 1.4-liter turbocharged 4-tube. After installation, stake nut. Check the style nut that is on the vehicle when staking the nut. Check out the full specs of the 2012 Chevrolet Sonic LTZ Hatchback, from performance and fuel economy to colors and materials ... Torque. Tang on ring must press through slot on spindle. See the Owner's Manual for more information. 2013-2017 Tighten in three steps: First, 111 ft-lbs/150 Nm; second, loosen 45 degrees; last, tighten 185 ft-lbs/250 Nm. 2005-2017 FRONT 151/205-ft/lbs/Nm REAR 151/205-ft/lbs/Nm. 2012-2017 There are two types of wheel drive shaft nuts, both of which have different tightening torque specifications. Use new original equipment nut. The 3 short screws are installed first, then the long screws. Check the style nut that is on the vehicle when staking the nut. Step One. Find specifications for every 2012 Chevrolet Sonic: gas mileage, engine, performance, warranty, equipment and more. have the same problem? Children are safer when properly secured in a rear seat in the appropriate child restraint. BO-38185 Hose Clamp Pliers ; EN-45059 Angle Meter ; For equivalent regional tools, refer to Special Tools. The Chevrolet Aveo (/ ə ˈ v eɪ. Ill probably go with 90. The Sonic is spacious for its small-car class, and it's available as either a sedan or a hatchback. Stake style one nut and make sure not to fracture the nut. Engine. Tighten in three steps: First, 111 ft-lbs/150 Nm; second, loosen 45 degrees; last, tighten 185 ft-lbs/250 Nm. Power is transmitted to the wheels via a 5 speed manual transmission. Use new original equipment nut. Step-by-Step Instructions Tapered Seat Plugs. 2011-2017 Tighten in three steps: First, 111 ft-lbs/150 Nm; second, loosen 45 degrees; last, tighten 185 ft-lbs/250 Nm. Stake style two nut and evenly split nut and ensure it is fully staked. Get the BEST auto repair information Alldatadiy.com and Eautorepair.net are professional-grade shop manuals—period. 2012 Chevrolet Sonic Specs & Performance Sedan 4D LT Specifications and Pricing . Chevrolet Wheel … Chevrolet Cruze 2013 - Find out the correct alloy wheel fitment, PCD, offset and such specs as bolt pattern, thread size(THD), center bore(CB) for Chevrolet Cruze 2013 Need the torque specs on tightening the bolts. w/o LNF & MU3 2009-2010 155/210-ft/lbs/Nm. FWD 2012-2015 FRONT 151/205-ft/lbs/Nm Use new original equipment nut. However, Alldatadiy.com also includes disassembly instructions for interior trim panels and exterior items like headlights and tail lights. Chevrolet Sonic 2015 - Find out the correct alloy wheel fitment, PCD, offset and such specs as bolt pattern, thread size(THD), center bore(CB) for Chevrolet Sonic 2015 So you have to refer to the factory legends to learn the identification symbols and then refer back to circuit diagrams to find the splice and ground locations. SS 2014-2017 Tighten to 258 ft-lbs/350 Nm. Always use a new nut. Engine, ECOTEC Turbo 1.4L Variable Valve Timing DOHC 4-cylinder sequential MFI (138 hp [103 kW] @ 4900 rpm, 148 lb-ft of torque [199.8 N-m] @ 1850 rpm), Steering, power, Electric Power Steering (EPS), Wheels, 15" (38.1 cm) steel with full bolt-on wheel covers, Tire, T115/70R16, blackwall, compact spare, Mirrors, outside manual, body-color, manual-folding. Detailed car specs: 2013 Chevrolet Sonic. 2017 Always replace nut/bolt after removal. Children are safer when properly secured in a rear seat in the appropriate child restraint. The only hardware items are abutment clips that should be replaced with the brake pads. 125 lb-ft @ 3800 rpm Transmission. 2012 CHEVROLET SONIC; 1.4L; 4 CYL; 2WD; MANUAL; 100,000 MILES; Need the sequence and torque specs for turbo/exhaust manifold for the car listed above lt model. Turn adjusting nut to align. See onstar.com or dealer for details.